paulgtt Posted March 3, 2018 Report Share Posted March 3, 2018 Hi guys, I'm Paul from Grantham, Linc's and own a blob STi. Have had a couple of classics previously, a V3 STi and V5 STi Type RA but always ended up going back to Evo's haha, however, I wanted more power and rather then spend a fortune forging my most recent Evo 5 I decided to take the plunge into another Scooby but a slightly "tweeked" version..... Big spec but the basics are a 2.1 forged stroker with a GT35R strapped to it Had a few little issues since I got but nothing overly major, loving it so far though and looking forward to getting to some meets if any are coming up Quote Link to comment Share on other sites More sharing options...
Steve Posted March 3, 2018 Report Share Posted March 3, 2018 Hi @paulgtt Welcome to m-soc Car looks great Any plans for it ? Track days maybe ? The monthly meet is actually tomorrow. Details are in the social section Quote Link to comment Share on other sites More sharing options...
paulgtt Posted March 3, 2018 Author Report Share Posted March 3, 2018 Thanks @Steve. Looking at new coilovers and polybushes for the next things to do. Would like to take it on track at some point, planning on going Santa pod mid April. Won't be able to make tomorrows meet but have seen the clinics dyno day so am going to check if I'll be free for that Quote Link to comment Share on other sites More sharing options...
Steve Posted March 3, 2018 Report Share Posted March 3, 2018 5 minutes ago, paulgtt said: Thanks @Steve. Looking at new coilovers and polybushes for the next things to do. Would like to take it on track at some point, planning on going Santa pod mid April. Won't be able to make tomorrows meet but have seen the clinics dyno day so am going to check if I'll be free for that More than welcome to attend the RR day Quote Link to comment Share on other sites More sharing options...
Fez the plodder Posted March 4, 2018 Report Share Posted March 4, 2018 Hello paul welcome to the club. nice looking car mate, hopefully see you at the rolling road day...... fez 👍 Quote Link to comment Share on other sites More sharing options...
b20sx Posted March 4, 2018 Report Share Posted March 4, 2018 Hi paul. Welcome to msoc! Looks a great example with plenty of power! Quote Link to comment Share on other sites More sharing options...
paulgtt Posted March 4, 2018 Author Report Share Posted March 4, 2018 Cheers guys. Hopefully be able to make the dyno day. Its got enough power for now anyway! Quote Link to comment Share on other sites More sharing options...
Big Shrek Posted March 4, 2018 Report Share Posted March 4, 2018 hi and welcome to the club lovely car you have there and im pretty sure i have seen it somewhere before, is it running around 530bhp? Quote Link to comment Share on other sites More sharing options...
paulgtt Posted March 4, 2018 Author Report Share Posted March 4, 2018 Thanks, yes it's at 543bhp 480ftlb. May look at increasing it at some point but it's pretty quick as is Quote Link to comment Share on other sites More sharing options...
hughy Posted March 4, 2018 Report Share Posted March 4, 2018 Hi Paul and welcome to M-soc car looks great 👍👍 Quote Link to comment Share on other sites More sharing options...
paulgtt Posted March 4, 2018 Author Report Share Posted March 4, 2018 Thanks mate, Just paid my membership as well Quote Link to comment Share on other sites More sharing options...
Big Shrek Posted March 4, 2018 Report Share Posted March 4, 2018 who built and mapped the car? Quote Link to comment Share on other sites More sharing options...
paulgtt Posted March 4, 2018 Author Report Share Posted March 4, 2018 Andy Williams built it in May 2015, Chevron machine work and Bob Rawle mapped it. Quote Link to comment Share on other sites More sharing options...
paulgtt Posted March 4, 2018 Author Report Share Posted March 4, 2018 Spec list: Owen developments gt35r with motorsport core 82mm billet wheel and 9cm hotside with anti surge front cover. 84mm chevron design samco inlet pipe Fully cdb decked and bored 2.5 nitrided crank Chevron motorsport machined head ACL race main and big end bearings Williams rods with arp bolts Mahle high compression stroker piston RCM sump baffled plate Cosworth oil pump Cosworth head gasket RCM 14-12head studs Cosworth kevlar timing belt Subaru water pump RCM thermostat Chevron motorsort combined ally rad/oil cooler with braided oil lines Mocal thermostat sandwich plate Perrin front mount intercooler RCM stainless headers 4 port oil catch tank RCM 340ltrh fuel pump 4bar map sensor Bosch 850cc injectors NGK iridiums Alcatek ecu with lc and als enabled BMC induction kit Miltek sport 3 inch inner bore turbo back exhaust Quaife atb front diff AP racing paddle clutch Bc coilovers Spec c high caster bottom arms Whiteline anti rollbars Whiteline anti lift kit Whiteline camber bolts Whiteline bushes Cusco chassis braces Tein strut brace Carbon lorraine rc8 wrc front pads Godspeed grooved front discs Feredo ds2500 rear pads Godspeed grooved rear discs Eibach spacers Rota GRA 18" alloys 225 40 PS4's Zun sport front grill Tein bonnet stays Front splitter Carbon WRC mirrors De-tangod headlamps 4mm mud flaps Blitz turbo timer Quote Link to comment Share on other sites More sharing options...
+Doc+ Posted March 8, 2018 Report Share Posted March 8, 2018 Hi and Welcome! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.